基于核酸的纸基荧光生物传感器的设计及应用

纸基生物传感器由于其具有成本低、操作方便、生物可降解、识别元件用量低等优点,近年来受到了广泛的关注。其中,以功能核酸作为识别元件的纸基荧光生物传感器具有较高的灵敏度、瞬时响应以及实时检测等特性,在便携式传感设备方面展现出巨大的潜力。此外,将核酸作为识别元件的纸基无细胞蛋白合成平台,通过条件合成的报告荧光蛋白可实现对病毒、重金属等目标物的特异性检测,具有良好的应用前景。首先,本文介绍了基于核酸的纸基荧光生物传感器的设计,特别是基于核酸的识别元件与纸基材料的结合方式。其次,总结了基于核酸的纸基荧光生物传感器在临床诊断、食品安全检测、环境污染物检测等不同领域的最新研究进展,讨论了其优势与局限性。最后,探讨了基于核酸的纸基荧光生物传感器的发展方向与应用前景,以期为相关领域的研究提供参考。     

正交试验结合响应面法优化诃子多糖提取工艺

采用正交试验结合响应面法优化诃子多糖的提取工艺,以诃子多糖的提取率为指标,以固液比、提取温度、提取时间和提取次数为因素,正交试验初步筛选工艺参数,响应面法做进一步优化.结果表明,多糖提取的最佳工艺条件为固液比1∶28,提取温度69℃,提取时间1h,提取次数3次,各项指标相对误差均小于2%,应用响应面法可减少诃子多糖提取时间.     

静态顶空/气相色谱-质谱法同时测定化妆品中22种有毒挥发性有机溶剂残留

以2015版《化妆品安全技术规范》中规定的常见禁用及限用有毒挥发性有机溶剂为研究对象,建立了静态顶空/气相色谱-质谱法(SHS/GC-MS)同时测定化妆品中22种有毒挥发性有机溶剂(VOC)(二氯甲烷、顺式-1,2-二氯乙烯、反式-1,2-二氯乙烯、2-氯-1,3-丁二烯、三氯甲烷、1,2-二氯乙烷、苯、四氯化碳、三氯乙烯、甲苯、四氯乙烯、氯苯、乙苯、三溴甲烷、间二甲苯、对二甲苯、苯乙烯、邻二甲苯、异丙苯、1,4-二氯苯、1,2-二氯苯、六氯丁二烯)残留的检测方法。试样在80℃下30 min静态顶空,经DB-1柱分离后,采用选择离子监测模式(SIM)进行定性定量分析。优化了顶空、色谱和质谱参数,结果表明:22种VOC在0.5~50 ng/m L浓度范围内均呈良好的线性关系,相关系数均大于0.99,在1.0,2.0,5.0 ng/m L 3个浓度加标水平下的平均回收率为80.3%~102.7%,相对标准偏差(RSD,n=6)为6.4%~9.9%,检出限为0.2~5.0 ng/g。结果表明,该方法简便、灵敏、准确,具有良好的重现性和稳定性,适合于化妆品中22种VOC残留的筛查和确证检测。     

铜掺杂氧化锌纳米纤维宽线性响应乙醇气体传感器

采用电纺丝技术结合高温煅烧制备了铜掺杂氧化锌复合纳米纤维,并通过XRD,XPS,SEM和TEM等手段对材料进行表征.将所得材料作为敏感层构筑了气体传感器,器件对乙醇蒸气具有很好的传感特性,特别是当Cu/Zn摩尔比为1∶60时,由于Cu组分的活化作用,所得传感器不仅具有高灵敏度、快速响应恢复(2 s/7 s)特性及优良的稳定性,而且在5~104μg/g超大乙醇蒸气浓度范围内都能保持良好的线性关系(R2=0.99),这不仅有利于乙醇实际检测,而且对宽响应范围及高灵敏传感器的发展具有重要意义.     

具有缺失数据的Eichhorn模型

为了解决在Eichhorn乘法扰动模型中存在的项目无回答问题,对敏感变量总体均值在辅助变量总体均值已知与未知条件下提出了比率插补方法.理论比较和数值模拟得出的结果表明提出的插补方法比传统的方法效率更高.     

Electrostatic contribution to the ion solvation energy: cavity effects

Ion solvation process has been analysed for the spherically symmetrical system where an ion is located inside a cavity surrounded by an isotropic nonlocal dielectric medium. It has been proven that for any dielectric properties of the medium, the electric field outside the cavity as well as the ion solvation energy depend only on the total ion charge but not of the particular distribution of the ion charge density inside the cavity. These characteristics remain unchanged if the charge is displaced from the external boundary of the cavity into it. Analytical formulas for them have been derived for a particular model of the nonlocal dielectric function. Comparison of results for the solvation energy on the basis of this new theory and of the conventional approach (disregarding the existence of the cavity) shows a significant difference between their predictions if the ion charge is displaced inside the ion cavity.     

Application of fractional calculus methods to asymmetric dynamical response of CB-Filled rubber

Frequency-sweep tests at various temperatures were conducted to study the asymmetric dynamic response of carbon black (CB) filled rubber. The master curves of storage modulus were constructed by use of time-temperature superposition (TTS), and the dynamic response of the material over a wide range of frequencies covering about 20 decades exhibits asymmetry. Based on the experimental results, the fractional Zener model and Prony series are verified to be unsuitable to reproduce the dynamicviscoelastic behavior. Therefore, a modified model by adding a spring-pot into the fractional Zener model is presented. The applicability of the modified model in describing the dynamic behavior of the CB-filled rubber is validated by the experimental results.     

Comparative Studies of Selected Criteria Enabling Optimization of the Extraction of Polar Biologically Active Compounds from Alfalfa with Supercritical Carbon Dioxide

The aim of this research was to provide crucial and useful data about the selection of the optimization criteria of supercritical carbon dioxide extraction of alfalfa at a quarter-technical plant. The correlation between more general output, including total phenolics and flavonoids content, and a more specified composition of polar constituents was extensively studied. In all alfalfa extracts, polar bioactive constituents were analyzed by both spectrometric (general output) and chromatographic (detailed output) analyses. Eight specific phenolic acids and nine flavonoids were determined. The most dominant were salicylic acid (221.41 µg g⁻¹), ferulic acid (119.73 µg g⁻¹), quercetin (2.23 µg g⁻¹), and apigenin (2.60 µg g⁻¹). For all seventeen analyzed compounds, response surface methodology and analysis of variance were used to provide the optimal conditions of supercritical fluid extraction for each individual constituent. The obtained data have shown that eight of those compounds have a similar range of optimal process parameters, being significantly analogous for optimization based on total flavonoid content.     

Enhanced Static Modulated Fourier Transform Spectrometer for Fast Approximation in Field Application

We discuss the data sampling frequency, the spectral resolution, and the limit for non-aliasing in the static modulated Fourier transform spectrometer based on a modified Sagnac interferometer. The measurement was performed in a very short 4 ms, which is applicable for real time field operation. The improved spectrometer characteristics were used to investigate the spectral properties of an InGaAs light emitting diode. In addition, The measured spectral peak was shifted from 6420 cm⁻¹ to 6365 cm⁻¹, as the temperature increased from 25 °C to 40 °C, when the operating current is fixed to be 0.55 A. As the applied current increased from 0.30 A to 0.55 A at room temperature, the spectral width was broadened from 316 cm⁻¹ to 384 cm⁻¹. Compared to the conventional Fourier transform spectrometer, the measured spectral width by the static modulated Fourier transform spectrometer showed a deviation less than 10%, and the spectral peak shift according to the temperature rise showed a difference within 2%.